Available in two versions:
with fixed forks, without additional lift: two forks welded to the operator platform allow direct access onto the pallet for order picking.
with lifting forks and additional lift: thanks to the additional lift during picking it is possible to carry the pallet at operator height.
Specifications
Overall chassis width: 880 mm
Operator platform: width 880 - 1500 mm
Main lift for platform operator: 1165 mm or 1900 mm.
Driver’s cabin
Thanks to the platform which gives ample freedom of movement, the order picker guarantees optimum performance. The low position of the platform gives added comfort when lifting and lowering. The suspension of the platform and the surface of the cabin absorb bumps and rocking which may occur while being driven, or during lifting or lowering. The deadman switch is integrated and set in the floor in the surface of the platform. The control display panel as well as the storage trays, are integrated into the front section, between the mast columns. On the left is the steering, and on the right the grab handle with butterfly switch for driving. With the butterfly switch positioned in front of the grab handle the direction of drive and speed are activated. In the curve of the grab handle it is possible to activate, by means of buttons, the hydraulic functions and the horn.
Chassis
The chassis is an extremely rigid steel structure. The motor housing is protected by a cover in sheet steel which can be lifted by gas springs/struts. The battery cover is metal.
Drive
The drive motor mounted vertically forms a single drive unit with the transmission, the magnetic brake and the drive wheel. The order picker can be fitted with guide rolls, which are useful in narrow aisles.
MasterDrive control
The electronic control offers great reliability and a high level of safety. The MOSFET control technology acts as a central unit: all manoeuvres are controlled through the processing of signals and carried out by a microprocessor. An integrated diagnostics and service interface allows easy configuration and parameter setting of the fork lift with the service laptop.
Battery
24V 440Ah - 560Ah DIN battery. Ability to change the battery from both sides, by means of a fork lift truck or roller.
Steering
The standard fit electric steering always takes the wheel to a central position on ignition. The picker is easily and precisely manoeuvrable. An LED on the control panel indicates the wheel position. The steering angle control guarantees safe driving features with high performance.
Lift and hydraulic system
The picker has a stable single column version. Thanks to the width of the column, the control panel is contained in the column, thus making it possible to construct a vehicle which is extremely short and manoeuvrable. Lifting and lowering movements are activated with buttons by means of electro-valves. A pressure-limiting valve protects the machine from overload. The lowering hydraulic cylinder shock absorber allows gentle lowering of the cabin, thus protecting both the operator and the material.
Brakes
The braking system acts with two components: The electro-mechanical drive brake parks the vehicle when not being used. The regenerative braking system acts during use by: releasing the butterfly switch the motor brake is activated automatically and is electronically controlled, braking the order picker smoothly.
Standard specifications
XOP1 with 1900 mm lift platform with protection rail, has a pallet sensor.
? An electronic start switch for controlling drive and steering
? Safety valves for the hydraulic system
? Overload and short circuit electronic safety devices
? Side safety barriers for the versions with lift platform over 1160 mm
? Overhead protection guard for the operator for fork lift over 1800 mm.
Additional equipment
? Various versions:
? Low level lifting, with additional lift
? High level lifting, without additional lift
? High level lifting, with additional lift
? Operator overhead protection guard
? Driver position lighting
? Work area lighting
? Rearview mirror
? Additional lift for forks
? Triple side barrier
? Display instrument for displaying battery capacity and work hours
? Functioning with accompaniment for order picking from ground level
? Control from load side or column side
? Equipped for refrigerator units
? Automatic braking at the end of the aisle
? Rear side padding on load side up to knee level
? Steering wheel with steering lever
? Mast available in two heights
? Intermediate lift disengagement
? Moving storage tray which follows
? lifting and lowering
? Writing console for storage tray with paperweight
? Adapter plate for data terminal, printer and scanner
? Driver platforms and chassis in various widths
? Different plates and fork holders for different pallets
? Mechanical steering override with/without gear recognition
? Batteries different sizes
? Roller for side battery changing
? Set of cables for interchangeable battery
? Special equipment available on request
? Service and maintenance
? Group housing easily accessible with wide-opening cover, even along the aisle
? Central interface for service and diagnostics
? Battery cover for maintenance from above
| Specifications |
| 1.2 |
Manufacturer's type designation |
|
XOP 1-1 Picker low |
XOP 1-2 Medium level with auxiliary lift |
XOP 1-3 Medium level picker |
XOP 1-4 Medium level with auxiliary lift |
| 1.3 |
Drive: electric, diesel, petrol, fuel gas, mains |
|
Electric |
Electric |
Electric |
Electric |
| 1.4 |
Operator type: hand, with 2 operators, standing, seated, order picker. |
|
Standing |
Standing |
Standing |
Standing |
| 1.5 |
Capacity / Load |
Q (t) |
1 |
1 |
1 |
1 |
| 1.6 |
Load centre distance |
c (mm) |
400 / 600 |
400 / 600 |
400 / 600 |
400 / 600 |
| 1.8 |
Load distance, centre of drive axle to fork |
x (mm) |
130 |
130 |
130 |
130 |
| 1.9 |
Distance between axles |
y (mm) |
1320 |
1410 |
1320 |
1410 |
| Weights |
| 2.1 |
Service weight (including battery) |
kg |
1475 |
1575 |
1810 |
1910 |
| 2.2 |
Unloaded axle load (front/rear) |
kg |
315 / 2160 |
315 / 2260 |
470 / 2340 |
470 / 2440 |
| 2.3 |
Axle loading unladen (front/rear) |
kg |
880 / 595 |
880 / 695 |
1010 / 800 |
1010 / 900 |
| Wheels and tyres |
| 3.1 |
Tyres: solid rubber, superelastic, pneumatic, polyurethane |
|
Vulkollan |
Vulkollan |
Vulkollan |
Vulkollan |
| 3.2 |
Front wheel dimensions |
mm |
O 250 X 80 |
O 250 X 80 |
O 250 X 80 |
O 250 X 80 |
| 3.3 |
Rear wheel dimensions |
mm |
O 150 X 100 |
O 150 X 100 |
O 150 X 100 |
O 150 X 100 |
| 3.5 |
Wheels: number front/rear (x=driven wheels) |
|
1x / 2 |
1x / 2 |
1x / 2 |
1x / 2 |
| 3.6 |
Front tread |
b10 (mm) |
0 |
0 |
0 |
0 |
| 3.7 |
Rear tread |
b11 (mm) |
768 |
768 |
768 |
768 |
| Overall dimensions |
| 4.2 |
Height, mast lowered |
h1 (mm) |
1470 |
1470 |
2200 |
2200 |
| 4.4 |
Lift |
h3 (mm) |
965 |
965 |
1700 |
1700 |
| 4.5 |
height, mask extended |
h4 (mm) |
2290 |
2290 |
3023 |
3950 |
| 4.7 |
Height of overhead guard |
h6 (mm) |
- |
- |
2250 |
2250 |
| 4.8 |
Seat height / stand height |
h7 (mm) |
200 |
200 |
200 |
200 |
| 4.11 |
Additional lift |
h9 (mm) |
- |
740 |
- |
740 |
| 4.14 |
Height of elevated platform |
h12 (mm) |
1165 |
1165 |
1900 |
1900 |
| Picking height (h12 +1600 mm)4.14.1 |
h28 (mm) |
2765 |
2765 |
3500 |
3500 |
| 4.15 |
Lowered fork height |
h13 (mm) |
85 |
85 |
85 |
85 |
| 4.19 |
Overall length |
l1 (mm) |
2465 / 2865 |
2555 / 2955 |
2465 / 2865 |
2555 / 2955 |
| 4.20 |
Length to face of forks |
l2 (mm) |
1665 |
1755 |
1665 |
1755 |
| 4.21 |
Overall width |
b1 /b2(mm) |
880 |
880 |
880 |
880 |
| 4.22 |
Fork dimensions |
s/e/l (mm) |
60 / 120 / 800 / 1200 |
60 / 120 / 800 / 1200 |
60 / 120 / 800 / 1200 |
60 / 120 / 800 / 1200 |
| 4.23 |
Fork carriage DIN 15173, Class/type, A/B |
|
Welded forks |
Welded forks |
Welded forks |
Welded forks |
| 4.24 |
Fork carriage plate width |
b3 (mm) |
|
640 / 560 |
640 / 560 |
640 / 560 |
| 4.25 |
Distance between fork-arms |
b5 (mm) |
640 / 560 |
640 / 560 |
640 / 560 |
640 / 560 |
| 4.27 |
Width on guide rolls |
b6 (mm) |
1280 / 1080 |
1280 / 1080 |
1280 / 1080 |
1280 / 1080 |
| 4.31 |
Ground clearance, laden, below mast |
m1 (mm) |
30 |
30 |
30 |
30 |
| 4.32 |
Ground clearance, centre of wheelbase |
m2 (mm) |
30 |
30 |
30 |
30 |
| 4.33 |
Aisle width for pallets 800 x 1200 (l6 x b12) |
Ast (mm) |
1380 |
1380 |
1380 |
1380 |
| 4.34 |
Aisle width for pallets 800 x 1200 (b12 x l6) |
Ast (mm) |
1080 |
1080 |
1080 |
1080 |
| 4.35 |
Turning circle |
Wa (mm) |
1530 |
1620 |
1530 |
1620 |
| 4.42 |
Track change aisle for pallets 800 x 1200 (b12 x l6) |
Au (mm) |
2840 / 3120 |
2930 / 3210 |
2840 / 3120 |
2930 / 3210 |
| Performance |
| 5.1 |
Travel speed (laden/unladen) |
km/h |
9.0(1) |
9.0(1) |
9.0(1) |
9.0(1) |
| 5.2 |
Lifting speed (laden/unladen) |
m/s |
0.10 / 0.15 |
0.10 / 0.15 |
0.10 / 0.15 |
0.10 / 0.15 |
| 5.3 |
Lowering speed (laden/unladen) |
m/s |
0.25 / 0.24 |
0.25 / 0.24 |
0.25 / 0.24 |
0.25 / 0.24 |
| 5.9 |
Acceleration time, laden/unladen |
s |
7.8 / 6.5 |
7.8 / 6.5 |
7.8 / 6.5 |
7.8 / 6.5 |
| 5.1 |
Service brake |
|
Electric |
Electric |
Electric |
Electric |
| Electric motor |
| 6.1 |
Drive motor, rating KB 60’ |
kW |
2.1 |
2.1 |
2.1 |
2.1 |
| 6.2 |
Lift motor, rating 15% ED |
kW |
2 |
2 |
3 |
3 |
| 6.3 |
Battery acc. IEC 254 – 2; A, B, C, no |
|
IEC 254-2; A |
IEC 254-2; A |
IEC 254-2; A |
IEC 254-2; A |
| 6.4 |
Voltage / nominal capacity |
V / Ah |
24 / 440 L (560 L) |
24 / 440 L (560 L) |
24/ 440 L (560 L) |
24 / 560 L (440 L) |
| 6.5 |
Battery weight (± 5%) |
kg |
380 (510) |
380 (510) |
380 (510) |
510 (380) |
| 6.6 |
Energy consumption acc. to VDI cycle |
kWh/h |
2 |
2 |
2 |
2 |
| Other |
| 8.1 |
Drive type |
|
MOSFET |
MOSFET |
MOSFET |
MOSFET |
| 8.4 |
Sound level at the driver.s ear |
dB (A) |
< 69.8 |
< 69.8 |
< 69.8 |
< 69.8 |
|
